Contents
Pneumatic mixers sometimes called air-mix mixers or air-driven mixers are mixers that use compressed air or air bubbles instead of electricity to mix or homogenize materials or powders. The blender consists of a mixing silo and in some cases a central conveying tube with an inverted conical deflector at the top for spreading material.
Pneumatic mixers are equipped with aerators mounted around a housing cone. Compressed air or gas is introduced intermittently at high velocities through nozzles present at the bottom or side of the silo, to mix powder materials that exhibit expansion characteristics when aerated.
Particles are reoriented in relation to one another as a result of the expansion of a powder bed by gas. The nozzles are arranged in a manner that escaped air stream in vertical motion gives a chance for powers to settle.
To achieve mixing, the system employs blower or compressor to generate airflow. The solid particles rise due to the drag force of the air injected and an increase in air velocity causes agitation in the bed, resulting in the formation of bubbles which causes blending to take place.
Factors that determine the amount of air required to fluidized the system and the minimum fluidized velocity are;
Although pneumatic mixed may differ from one another in vessel geometry, air nozzle type, and air nozzle configuration no pneumatic mixer subclass has been identified.
Read Also: Diffusion Mixers
1. Pneumatic blenders are best used for non-critical blends where particle sizes and densities are similar among all the components of the mix so that fines are not carried to the top by air.
2. It is used in mixing dry and free-flow powders.
1. There is less risk of failure due to misapplication.
2. They are safe for use with flammable solvents.
3. They are easy to clean and maintain.
4. Contamination of material is minimal since there are no moving parts.
5. The blending process is extremely gentle.
6. Less handling of materials is required with pneumatic blender.
7. Pneumatic blender is insensitive to heat.
8. The compressed air expanding in the air engine cools the agitator.
9. Air is practically available everywhere in unlimited qualities.
1. Compressed air requires good preparation and constant piston speed.
2. Compressed air is economically only up to a certain force requirement.
3. The exhaust air is loud.
